Oxysorb oxygen and water purifier for the pond, 1kg
Oxysorb oxygen and water purifier for the pond, 1kg
3872€3872€Out of stock.Contact usOxysorb oxygen and water purifier for the pond
-
Oxygen sorbent Oxysorb is used in aquaculture and ponds as an oxygen source and water purifier.
Used to increase the amount of oxygen throughout the year after the destruction of algae, to improve the decomposition of sludge, to eliminate sulfide and ammonia emissions, to clarify water.
Oxysorb can be used in situations where mechanical aeration is not possible.
At the right concentration, the product is environmentally safe, decomposed into water, molecular oxygen and calcium hydroxide.
Works all over the water column.
In winter, it is suitable to create oxygen zones for fish near the harrows.
1kg oxygenates about 50-100m3 of water.
1kg emits oxygen - 200g.
Long-acting product. Releases oxygen min. 6 months
Dosage:
Oxygen saturation: 10-20g / m3 of water.
For water treatment in summer and oxygen saturation: 20-50g / m3.
Usage:
put in a plow in winter, spreading as widely as possible.
Use no more than 1kg for 1 eket, dividing the dose into two parts during the day.
2-3 oxygen zones for fish can be created for a 1000m3 pond
Recommended min. depth 2 m.
If the depth is less, take half of the dose one day and the other the next day.
in summer - for water purification (clarification, phosphorus, nitrogen reduction, eutrophication reduction), the product should be dosed to the entire volume of water, i.e. if you have a 1000m3 pond, you should aver. 30kg / 1000m3.
The water clears in 2-3 days.
Use AquaPro EZ or Pond Biotex bacteria to decompose the settled sludge.
The recommended dose for oxygen saturation is 10 kg / 1000 m3.
Spread as widely as possible.
Do not use if pond pH is 8 or higher.
Safe for flora and fauna.
made in Germany.