Oxygen release products for water and soil

Granular and powdered oxygen products Oxy

For aquaculture / ponds / wastewater and contaminated soil treatment and wherever additional oxygen is needed. 

The products are used to increase the amount of oxygen in various processes, by destroying algae, using algicides, improving the decomposition of bottom sludge, destroying sulfides, ammonia, anaerobic zones, cleaning contaminated soil, oxygenation in winter in ponds and elsewhere where an oxygen source is needed.

Oxygen products in water bodies can be used in situations where mechanical aeration is not possible. 

Avibac Oxy L 

Slowly releases oxygen into water bodies for up to 3 months.

The product is safe when used at recommended doses. Breaks down into water, molecular oxygen and calcium hydroxide.

1 kg releases 200 g of oxygen over time. In winter, 1 kg creates up to 50 m3 of oxygenated zone for ponds. 

In the summer, it releases oxygen for fish, destroys anaerobic zones, helps in the decomposition of pollutants, sludge, rotten leaves, prevents the formation of sulfides

A 1000m3 pond would require 5-10kg of dosage for a 3-month season. Packages of 5kg.

Used 

• Water purification - an aid
• For long-term oxygenation. Provides sufficient dissolved oxygen.
• Helps reduce algae in the pond
• Helps remove carbon dioxide, which prevents fish from absorbing oxygen.
• Increases pH, prevents acidification
• To improve the removal of ammonia and ammonium under anaerobic conditions (rotting leaves and plants)
• To improve the removal of hydrogen sulfide
• To reduce organic pollution at the bottom of the pond
• To protect the pond from anaerobic bacteria that cause hydrogen sulfide and ammonia, methane
• Calcium supplement for flora and fauna
• To ensure the oxygen content in the water in winter and summer
• For biological purification of polluted water and soil
• To ensure the oxygen content at night, when the oxygen level drops and after the destruction of algae
• Safe for flora and fauna 

Remember - we can determine the adjusted dosage by measuring the oxygen content in the water. In water bodies, oxygen should be at least 4g/m3. 

Avibac Oxy 

This product releases oxygen quickly. All oxygen can be released within 24-48 hours.

1 kg of Avibac Oxy releases up to 130 g of oxygen. 

Used

• As a quick source of dissolved oxygen in ponds.
• As an aid to reduce green and blue-green algae.
• As an aid to remove filamentous algae. In this case, it is necessary to collect the dead algae and use bacteria to break down the dead algae remaining in the water. 

No preparation required. Increases the pH of the water. Does not pollute the environment: the final decomposition products are water and CO2.

Dosage: 5–15 kg/1000 m3

In ponds where fish live, the pH should be measured. 

After using Avibac Oxy, we see an area free of algae. 

Permeox Ultra

Slowly releases oxygen for up to 350 days. Designed for cleaning soil contaminated with petroleum products, organic pollutants.

During aerobic biological cleaning of petroleum products and other organic pollutants, the ability of aerobic microbes to biodegrade the amount of degrading pollutants may be limited by insufficient oxygen. SoilOxy, due to its low solubility in water, ensures sufficient oxygen for a very long period of time. Enhances bacterial growth/bioremediation processes

Compounds that can be aerobically degraded: benzene, toluene, ethylbenzene and xylene (BTEX), methyl ester butyl ether (MTBE), common petroleum hydrocarbons (TPH), non-halogenated
solvents and some halogenated compounds such as vinyl chloride. 

Permeox Ultra releases oxygen for the cleanup process in contaminated soil for up to 350 days. Form: granules or powder. Packaging: 5 kg, 50 kg

Technology: biological bioremediation

Aerobic bioremediation technologies are used to accelerate the rate of oxygen degradation of petroleum hydrocarbons and some fuels through natural biological processes. 

Product Information

By adding oxygen to the medium to be treated by pure oxygen injection using oxygen-releasing compounds, oxygen becomes available to aerobic microorganisms.
This process helps to facilitate the conversion of biodegradable compounds into CO2 and H2O. This technology can be used to effectively reduce oil, petroleum, gasoline, solvents and pesticide pollutants. 

Pollutants to be treated

• Chlorinated solvents – vinyl chloride
• Petroleum hydrocarbons – diesel products, gasoline products
• Benzene, toluene, ethylbenzene, xylenes
• Naphthalene
• Methyl tert-butyl ether 

Also:

• Tert-butyl alcohols
• Chlorobenzene
• Acetone, propylbenzene, trimethylbenzene

The product is environmentally friendly, safe for humans, subject to the rules of use

Information, brochures and orders: mbaviris@yahoo.com